The CMAX-810 Motion Control System provides an integrated solution for stepper motor motion control at 8A/phase (at 160V). It can operate stand-alone with user programming, or can be controlled by a central host individually or in groups as large as 32 axes using AMS Motion Command Language. The CMAX-810 operates on mains line voltage (120V standard/240V optional) and provides all motor and control signals on easy-to-use industrial connectors. All Motion Control Systems provide command programmable motor current, hold current, microstepping mode, velocity, acceleration, etc. Designed for industrial environments, it is enclosed in a highly robust casing, is fused for AC supply, an is actively cooled with a filtered fan.
The CMAX-810 is specifically designed to reduce electrical interference and maximize safety.
Features
- Highly Rugged Design
- Optimized for low EMI emissions and maximized safety
- Stepper Motor Peak Phase Current of 8 Amps @ 160Vdc
- optional 80V version
- individually programmable Run/Hold current settings
- Supports stepper motors up to NEMA34, and some NEMA42 applications
- System is Fuse-protected on both AC legs, and the driver is Short-circuit and Over-temp Protected
- Microstepping Driver System, programmable from 1/2 up to 1/256 step resolution
- Programmable Fixed or Variable Step resolution
- Programmable acceleration and deceleration ramps
- Five General-purpose Output Ports drive up to 1A per port
- Four Buffered and Filtered General-purpose Inputs Ports operate from 5 to 28V (VIO)
- Built-in Internal Command storage non-volatile memory (2K bytes)
- Optically-isolated Home, Limit+ and Limit- input ports
- Self-contained Homing routine
- Dedicated Go and Soft-Stop inputs
- Programmable Location Trip-point feature
- Dual-speed Jog feature with dedicated Jog Inputs
- Multi-axis communication mode allows to operate in parallel with other AMD products from the same host computer or PLC
Available Options
Encoder